Submersible Electric Pump Kit KIT4P 4/14 1.1/4" 1.5HP 104m

Applications of the Hidrobex submersible electric pump for artesian wells

4-inch multi-stage submersible electric pump kit for pumping clean water in deep wells, designed for domestic, industrial, civil or agricultural applications.
It is advisable to install a check valve near the pump to prevent water hammer.
The pump should be left suspended in the well to prevent it from sucking up the sludge deposited at the bottom, never using the pump's electrical cable for this purpose; for this, it is supplied with a rope.
It is supplied with an electrical panel with a capacitor inside.

OPERATION OF THE KIT4P SUBMERSIBLE ELECTRIC PUMP KIT

· Non-aggressive clean water fluid.
· Maximum liquid temperature 35 degrees C.
· Maximum immersion depth 40 meters.
· Maximum number of starts per hour 20.
· Maximum sand content 120 g / m3.
· Maximum diameter of suspended solids 2 mm.
· Water pH 6.5 - 8.5.

CONSTRUCTION CHARACTERISTICS PUMP BODY

· Power 1 HP – 0.75 KW.
· Amp 230V-1 8.3.
· Diameter 102 mm.
· Rope 30 meters.
· Cable 30 meters.
· Length 905 mm.
· Weight 12 kg.
· Maximum flow 6 m3 / h.
· Height Maximum 104 meters.
· Outer casing in AISI 304 stainless steel.
Motor encapsulation in AISI 304 stainless steel.
· POM impellers.
· POM diffusers.
· Suction and discharge supports in brass.
· Inlet grille in AISI 304 stainless steel.
· Motor shaft in AISI 304 stainless steel.
· External capacitor.
· HO7RN-F 4×2.5 power cable.

ELECTRICAL CHARACTERISTICS

· 4-inch rewound asynchronous bipolar submersible motor with IP68 protection rating.
· Class F insulation. Completely non-toxic lubricant and coolant, dielectric fluid known as white oil.
· Single-phase 230 V – 50 Hz.
· Supplied with electrical panel with capacitor.

CONNECTIONS

Ø Suction and discharge 1.1/4”