Online Support
232 424 626
Semi-Professional
The Jansen EFGCH-220 Hammer Shredder is a particularly powerful implement; its hydraulic side shift and reinforced angular gearbox make it stand out in its operation as a shredder, brush cutter, etc.
The Jansen EFGCH-220 Hammer Shredder has a cutting width of 210 cm and is driven by a cardan shaft.
Note:
The gearbox of the Jansen EFGCH-220 Hammer Shredder is not lubricated for safety reasons and must be filled with oil before use.
The cutting unit of the Jansen EFGCH-220 Hammer Crusher has a more robust gearbox than others in its class. Unlike cutting units equipped with lightweight "Y" hammers, the Jansen EFGCH-220 Hammer Crusher has high inertia generated by the heavy hammer blades and shaft, allowing this implement to perform better.
The 30 specially hardened hammers arranged on a double spiral transmission shaft crush The materials are reduced to the minimum size.
The Jansen EFGCH-220 Hammer Shredder also features a drag roller and a freewheel gearbox. The cutting height can be adjusted via the top controller and side rails. Galvanized slats suspended at the front of the cutting unit prevent stones from being thrown up.
The cutting unit is suspended using a 3-point hitch. Your tractor should have at least 50 HP.
Leave us your contact information, and a specialist will get in touch.
