By using the hydraulic side shift function, the Jansen EFGCH-195 Hammer Shredder can move both left and right. This operation requires a hydraulic control circuit on your tractor, as the cutting unit has a double-acting hydraulic cylinder for this purpose.

The cutting unit of the Jansen EFGCH-195 Hammer Shredder has the most robust gearbox in its class.. Unlike cutting units equipped with lightweight "Y" hammers, the Jansen EFGCH-195 Hammer Shredder has high inertia generated by the heavy hammer blades and shaft, allowing this implement to perform better.

The 32 specially hardened 0.8kg hammers, arranged on a double spiral drive shaft, shred materials to the minimum size.

The Jansen EFGCH-195 Hammer Shredder also has a drag roller and a freewheel gearbox. The cutting height can be adjusted via the top control and side rails. Galvanized slats suspended at the front of the cutting unit prevent stones from being thrown up.

The cutting unit is suspended using a 3-point hitch. Your tractor should have at least 50 HP.

With the rear hood open, maintenance work or changing the hammer blades will be easier. The hood must be closed during operation.