The Nutool RSN410P-2 water pump is equipped with a 79cc, 4-stroke, air-cooled gasoline engine.

With 2.6 Hp of power, it offers low fuel consumption and relatively quiet operation, making it suitable for use in residential environments.

The Nutool RSN4110P-2 water pump has a 1" (25 mm) outlet, with a maximum flow rate of 7,000 l/s. The maximum lift of 30 meters and suction capacity of up to 7 meters ensures good performance in different scenarios. The system has a built-in filter, which can be removed for cleaning, allowing the Nutool RSN4110P-2 water pump to handle water containing sand, dirt and other debris without compromising performance.

The Nutool RSN410P-2 water pump can be used in various situations, including: Agricultural and garden irrigation; Drainage of tanks, wells or flooded areas; Water transfers between reservoirs; Flood control in residential or agricultural areas; Pumping water for general purposes. Note: Although robust, it is not suitable for corrosive, chemical or hazardous liquids and should only be used for clean or slightly dirty water.