Online Support
232 424 626
The 1.2HP 240V 1.1/4" Large Well Pump with Float MXSM is a reliable and efficient solution developed for pumping clean water in large wells, combining a robust construction with high protection.
Equipped with a double seal, graphite and silicon in an oil chamber, for better protection of internal components.
Integrated float that allows the pump to automatically turn on when the water level rises and turn off when the water level falls.
This feature is a major highlight of the Electric Pump as it helps protect the equipment.The stainless steel body, turbines and diffusers in Noryl offer high corrosion resistance and greater durability, while the IP68 protection offers high resistance to water and dust ingress, allowing the Electric Pump to work in very demanding conditions.
The fact that the design is monobloc allows for simpler installation, less maintenance and a direct transmission of power from the motor to the electric pump.
Included: 15M cable that allows for easy installation in wide and deep wells.
Note:Installation must be carried out by a qualified technician, according to the manufacturer's specifications.
The installation of a magneto-thermal circuit breaker is mandatory. Failure to comply with these conditions may void the equipment warranty.
| Voltage | 240 V |
| Power | 1.2 HP |
| Flow Rate | 5000-1000 L/H |
| Manometric height | 14.5 to 68 MCA |
| Diameter | 5" |
| Voltage | 240V |
| Power | 1.2HP |
| Amp. | 6 |
| Output | 1.1/4" |
| Manometric height | 14.5-68 MCA |
| Each | 5000-1000 L/H |
| Maximum fluid temperature | 35ºC |
| Maximum immersion depth | 20M |
Leave us your contact information, and a specialist will get in touch.
