Online Support
232 424 626
The Hidrobex PB81 1HP 230V 1" Peripheral Electric Pump, suitable for clean water, has an excellent capacity to develop high pressures with reduced flow rates!
The 1" suction and discharge diameter, along with the 70 m maximum height and the maximum flow rate of 60 L/min, allow water to be pumped to locations above the electric pump.
The robust construction and support of the electric pump, both in gray cast iron, and the brass turbine contribute to greater durability and resistance of the Peripheral Electric Pump Hidrobex.
Suitable for small pressure groups.
Note:Installation must be performed by a qualified technician, according to the manufacturer's specifications. Installation of a magneto-thermal circuit breaker is mandatory. Failure to comply with these conditions may void the equipment warranty.
| Engine Type | Elétrico Monofásico |
| Power | 1 HP |
| Type of Liquid | Água Limpa |
| Maximum Flow Rate | 60 L/Min |
| Maximum Liquid Temperature | 40 ºC |
| Max Pressure | 8 bar |
| Maximum Suction Depth | 8 M |
| Maximum Inlet Temperature | 40 ºC |
| Suction Diameter | 1" |
| Maximum liquid temperature | 40º C |
| Maximum operating pressure | 8 bar |
| Maximum suction depth | 8 m |
| Ambient temperature | Up to 40ºC |
| Maximum height | 70M |
| Maximum flow rate | 60 L/Min. |
| Suction and impulsion diameter | 1" |
| Engine drive | |
| Mechanical seal | Ceramic/Graphite |
Leave us your contact information, and a specialist will get in touch.
