Online Support
232 424 626
Demanding Amateur








Applications
Bidirectional Operation: All Rover pumps of this model have a switch that allows reversing the direction of liquid transfer.
| Pump body | Bronze |
| Impulsor | Bronze |
| Motor shaft | AISI 304 Stainless Steel |
| Accessories | Supplied with IO-II three-position switch, cable, connector and accessories |
| Fluid | Previously decanted liquids, such as: WATER, WINE, MUST, MILK, SEAWATER, DIESEL, ADBLUE, OIL, etc. whose viscosity does not exceed 4º Engler. The liquids to be transferred must be clean, free of suspended solids or containing only a minimal amount of suspended solid particles with hardness and particle size characteristics such that they do not alter the surfaces inside the pump Liquid temperature 40 ºC max. – normal operation max. 60 ºC – transfer operation only (no pressure) |
| Maximum solid particle content | 0.5 mm |
| Maximum flow rate | 4500 L/H |
| Maximum height | 20 m |
| Engine | 2-pole induction 230 – 50 Hz |
| Insulation class | B |
| Degree of protection | IPX4 |
|
| BrandRover Pompe |
| Reference071444 |
| NameRover 30 CE Transfer Pump - 230V |
| Price149,00€ |
| LevelDemanding Amateur |
| Pump Construction Material |
| Maximum Liquid Temperature (ºC)40 |
| Maximum Particle Diameter0 |
| Maximum Flow Rate (L/h)4500 l/h |
| Maximum Discharge Height (cm)0 |
| Voltage (V) |
| Engine Type |
| Maximum Lifting Height (M) |
| Maximum Size of Solid Particles (mm) |
Leave us your contact information, and a specialist will get in touch.