Using the new machine without a break-in period will deteriorate acceleration performance and may reduce the machine's lifespan!

During the first 100 hours of use of the new machine (as indicated by the timer), follow the instructions below:

• Properly warm up the engine and the hydraulic oil.

• Avoid heavy load operations or abrupt movements. Keep the load at approximately 80% of maximum capacity during operation.

• Do not start, accelerate, steer, or stop abruptly, unless absolutely necessary

This machine is mainly used for the following operations:

• Excavation

• Trench Opening

• Side Trench Opening

• Leveling

• Loading

• Small dimensions and flexible operation

• Can be equipped with various accessories

• Track width with “adjustable width machine structure”

• Use of appropriate tools - Do not use damaged or deteriorated tools, nor tools manufactured for another purpose.

• Critical safety parts to be replaced periodically - Replace fuel hoses periodically.

• Explosion-proof lamps - When checking fuel, lubricating oil, coolant and battery electrolyte, use explosion-proof lamps to prevent fires and explosions.

• Preparation of the work area - Choose a stable and level work area. Ensure adequate lighting conditions. For indoor operations, ensure good ventilation. Remove obstacles and hazardous materials. Clean the slippery areas!
  
  • Maintaining the machine always clean - Clean the machine before maintenance. Turn off the engine before cleaning the machine. Protect electrical parts from water ingress, as infiltration may cause short circuits or malfunctions. Do not clean the battery, electronic control units, sensors, or connectors with water or steam.
  
  
  • Turn off the engine before maintenance - While the machine is running, or even stopped with the engine running, avoid lubricating or making additional adjustments.

• Keep away from moving parts - Keep away from all rotating and moving parts. Entanglement of hands or tools in rotating or moving parts may cause accidents with serious injuries. Tools or other objects that fall into or become inserted into the fan or fan belt will be crushed or cut. Never throw or insert any object into the fan or fan belt!

• Secure machine securing - Before maintenance or repairs under the machine, lower all moving work devices to the ground or the lowest position and secure the tracks. Do not access the area under the machine or work device before being properly supported.

• Precautions during refueling - Smoking or using open flames is prohibited during refueling and in the vicinity of the refueling point. Fill the fuel tank in a well-ventilated area. Do not fill the tank completely; leave room for fuel expansion. Handling hoses - Leaking lubricating oil or fuel can cause a fire. Do not twist, bend, or hit any hose!