However, lifting the wood to split it is laborious and exhausting. With the lifting mechanism of the HCT 6110, however, this becomes child's play. Simply roll the log into the lifting arm and then lift the axe again so that the lifting arm lifts the log.

The functionality is basically the same for standing and lying log splitters. An axe is introduced longitudinally into the log by the hydraulic pressure generated by an electric motor and a hydraulic pump.

The massive structure and powerful motor of the HCT 6110 allow for a splitting pressure of up to 10 tons, with which logs with a diameter of up to 30 cm and a length of up to 70 cm can be split without problems.

The low base plate, along with the log lifter, facilitates the setup of the log to be split, which allows for energy-efficient work.

The HCT 6110 wood splitter is operated via a 230-volt connection.

Our log splitter has a so-called two-handed operation. This means that only if you hold two levers or switches at the same time will the device start working.

Choose the location of the log splitter carefully and pay attention to the correct subsurface. This must be firm and level so that the log splitter does not wobble or tip over.

When splitting, always pay attention to the wood you are using.

Note: When working with a log splitter, you must use “personal protective equipment”. This way, you can avoid injuries caused by falling pieces of wood or splinters.